USRobotics NETServer/16 Manual de usuario descargar pdf (Pagina 100)

6-26 LAN-to-LAN Routing

This example will set up two NETServers for LAN-to-LAN

routing. NETServer B will be configured to dial NETServer A

on demand. In other words, when packets are waiting to be

transferred, NETServer B will form a virtual connection to

NETServer B. When the connection is no longer needed, it is

terminated.

Setting Up NETServer A

NETServer A will use ports 7 and 8 to handle incoming routing

from NETServer B. (Technically, these lines are unnecessary on

a new NETServer since the factory default, login network dialin,

will work just as well).

set s7 network dialin

set s8 network dialin

Since NETServer B will be dialing in to form a network connec-

tion, NETServer B is a network user. It will need an entry in

NETServer A’s user table.

add netuser nsb password xyzabc

(For CHAP, “nsb” is NETServer B’s Sysname)

set user nsb address 192.88.203.1

set user nsb netmask 255.255.255.0

set user nsb ipxnet 2

The NETServers will exchange dynamic routing information

(RIP packets) with each other.

set user nsb routing on

Save your work and reset the ports.

save all

reset all

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 283 284

Sin comentarios

USRobotics NETServer/16 Manual de usuario Pagina 100